Chapter 4 Management Via Snmp - Cisco GS7000 Installation And Configuration Manual

OL-29937-01
4 Chapter 4
Management Via SNMP
This chapter provides information about using Simple Network
Management Protocol (SNMP) commands for remote system
monitoring and control. The transponder core in the Status Monitor
recognizes SNMP v1 commands and sends SNMP v1 traps.
In This Chapter

Introduction ........................................................................................... 34

MIBs Used in the Optical Hub/Node ................................................ 35

MIB-2 Specifications ............................................................................. 36

Cisco Proprietary MIB Specifications ................................................. 39

HMS MIB Specifications ...................................................................... 43
33