Cisco GS7000 Installation And Configuration Manual page 42

Chapter 3 Configuration
Configuration Parameter Description/Values
RX Frequency
TX Frequency
Frequency Scan
TX Level
RX Level
28
The downstream frequency on which the
transponder receives commands from the
headend.
Valid range is 45 MHz to 174 MHz.
The upstream frequency on which the
transponder transmits to the headend.
Valid range is 5 MHz to 65 MHz.
Note: This menu item does not display following
discovery by the headend modem termination
system (HMTS).
Set transponder to auto-scan for communications
frequency with the headend.
Check Box Values:
checked = YES
unchecked = NO
Note: This menu item does not display following
discovery by the HMTS.
The transponder's transmitting output power
level.
Valid range is 24 dBmV to 50 dBmV
The transponder's receive power level.
Operational range is -20 dBmV to +20 dBmV.
(Anything over +30 dBmV can cause equipment
damage.)
OL-29937-01