Redundancy Control Table; Power Supply Table - Cisco GS7000 Installation And Configuration Manual

Chapter 4 Management Via SNMP

Redundancy Control Table

The saFnRedundancyControlTable consists of two elements: the index,
saFnRedundancyControlIndex, and saFnRedundancyState.
saFnRedundancyControlIndex displays 1 and 2. The first pair of receivers (Rx1 and
Rx2 in slot 6 and 5) are represented by 1. The second pair of receivers (Rx3 and Rx4
in slot 4 and 3) are represented by 2.
OID 1.3.6.1.4.1.1429.1.6.5.2.7.1.1
saFnRedundancyState displays the state of the redundant pair as:
RedundancyUnavailable(1), RedundancyOff(2), RedundancyOn(3),
RedundancyFail(4).
OID 1.3.6.1.4.1.1429.1.6.5.2.7.1.2
saFnRestoreTime indicates the time in seconds before the AB switch setting is
restored following the return of satisfactory optical power to the primary receiver.
OID 1.3.6.1.4.1.1429.1.6.5.2.8

Power Supply Table

The saFnPowerSupplyTable consists of two elements: saFnPowerSupplyIndex
indicates which power supply is mounted or not. The primary power supply
represented by saFnPowerSupplyIndex 1 and appears in the node in slot 2. The
redundant power supply is indicated by saFnPowerSupplyIndex 2 and appears in
the node in slot 1.
OID 1.3.6.1.4.1.1429.1.6.5.2.9.1.1
saFnPowerSupplySlot indicates whether a particular power supply is "mounted" or
"unmounted". In this case "mounted" means installed and receiving power, and
"unmounted" indicates that the power supply is not installed or not powered.
Although saFnPowerSupplySlot is read-write in the MIB, changing the value to a
different state has no effect on the actual power supply.
OID 1.3.6.1.4.1.1429.1.6.5.2.9.1.2
saFnLCMSoftwareVersion displays the active software version number for the local
control module, for example, 3.00.03.
OID 1.3.6.1.4.1.1429.1.6.5.2.10
saFnXPONSoftwareVersion displays the active software version number for the
transponder core module, for example, OHN_3.00.03.
OID 1.3.6.1.4.1.1429.1.6.5.2.11
42 OL-29937-01