Connecting The Target System - Renesas Emulation Pod M306N4T3-RPD-E User Manual

3.8 Connecting the Target System

There are several ways available to connect the emulation pod to target systems as shown in Figure 3.12.
Emulation pod probe
100-pin
0.65-mm-pitch
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-FLX100-T M3T-FLX100-R
(not included) (not included)
*1
LCC socket M3T-DIRECT100S M3T-DUMMY100S M3T-FLX-100NRB
100-pin LCC 100-pin QFP 100-pin QFP 100-pin QFP
(included) (not included) (not included) (not included)
: No. 1 pin position
*1 : These products are in one package.
Figure 3.12 Connecting the target system
CAUTION
Notes on Connecting the Target System:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulation pod.
( 41 / 76 )