Package Components; Other Tool Products Required For Development - Renesas Emulation Pod M306N4T3-RPD-E User Manual

Emulation pod for m16c/6n group m16c/6n4, 6n5
Table of Contents

Advertisement

Chapter 2. Preparation

2.1 Package Components

The M306N4T3-RPD-E package consists of the following items. When unpacking, check to see if
your M306N4T3-RPD-E contains all of these items.
Table 2.1 Package components
M306N4T3-RPD-E emulation pod main unit
FLX120-RPD flexible cable for connecting PC4701
M3T-F160T3-PRB converter board for M3T-FLX160C (preinstalled)
M30800T-PTC converter board for 100-pin 0.65-mm-pitch LCC
IC61-1004-051 100-pin 0.65-mm-pitch LCC socket (made by Yamaichi Electronics Co., Ltd.)
OSC-3 16MHz oscillator circuit board for main clock (preinstalled)
OSC-2 oscillator circuit board (bare board)
Resistor arrays for pulling up ports P0 to P5 (51 kΩ)
Hardware tool user registration FAX sheet (English/Japanese)
Repair request sheet (English/Japanese)
M306N4T3-RPD-E User's Manual (This manual)
M306N4T3-RPD-E User's Manual (Japanese)
* Please keep the M306N4T3-RPD-E's packing box and cushion material in your place for reuse
* If any of these items are missing or found faulty, please contact your local distributor.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics

2.2 Other Tool Products Required for Development

To bring forward programs development on M16C/6N4, 6N5 MCUs of the M16C/6N Group , the
products listed below are necessary in addition to those contained package above. Get them
separately.
Table 2.2 Other tool products
Emulator main unit
Emulator debugger
Converter board
* To purchase these products, contact your local distributor.
at a later time when sending your product for repair or other purposes. Always use these packing
box and cushion material when transporting this product.
Co., Ltd.
Item
PC4701 (excluding PC4701L and PC4700L)
M3T-PD30
For 100-pin 0.65-mm-pitch QFP (100P6S-A):
M3T-100LCC-DMS + M3T-DIRECT100S
M3T-100LCC-DMS + M3T-DUMMY100S
M3T-100LCC-DMS + M3T-FLX-100NRB
Required according to the foot pattern of the target system (see "3.8
Connecting the Target System" on page 41)
( 22 / 76 )
Quantity
1
1
1
1
1
1
1
6
1 each
1 each
1
1

Advertisement

Table of Contents
loading

Table of Contents