Table of Contents
Advertisement
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M306N4T3-RPD-E.
Table 5.1 Specifications of the M306N4T3-RPD-E
Emulators
Applicable MCU
Evaluation MCU
Usable mode
Emulation memory
Maximum operating frequency
Clock supply
Operating voltage
Operating temperature
Storage temperature
Power supply to emulation pod
Connection to target system
Refer to "3.8 Connecting the Target
System" (page 41).
Main clock oscillation frequency
Voltage (Main clock: no dividing)
This product
PC4701 (excluding PC4701L and PC4700L)
M16C/6N Group M16C/6N4, 6N5
M306N4FGTKP (dedicated package), M30627MHP-xxxGP (one each)
Single-chip mode, Memory expansion mode, Microprocessor mode
1 MB
Internal ROM, RAM area:
External area:
16 MHz (no-dividing) at 4.2 to 5.0 V (see the figures below)
X
-X
Internal oscillator circuit board (OSC-3)
IN
OUT
Switchable to external oscillator input
X
-X
Internal oscillator circuit board (fixed 32.768 kHz)
CIN
COUT
Switchable to external oscillator input
4.2 to 5.5 V
5 to 35°C (no dew)
-10 to 60°C (no dew)
Supplied from PC4701
100-pin 0.65-mm-pitch LCC socket:
(1) M30800T-PTC (included)
100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M30800T-PTC (included)
(2) M30800T-PTC (included)
(3) M30800T-PTC (included)
Main clock oscillation frequency
Voltage (Main clock: no dividing)
( 54 / 76 )
0 wait, 16 MHz (max.)
0 wait, 8 MHz (max.)
1 wait, 16 MHz (max.)
+ IC61-1004-051 (included)
+ M3T-100LCC-DMS (not included)
+ M3T-DIRECT100S (not included)
+ M3T-100LCC-DMS (not included)
+ M3T-DUMMY100S (not included)
+ M3T-100LCC-DMS (not included)
+ M3T-FLX-100NRB (not included)
Actual MCU
Advertisement
Table of Contents
