Section 5 Notice - Renesas H8S/2169 Series User Manual

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable
head before inserting the cable head into the user system IC socket.
2. The dimensions of the recommended mount pad for the user system IC socket are different from
those of the MCU.
3. To avoid breaking wires in the cable body, do not place heavy or sharp metal objects on the user
system interface cable.
4. While the emulator station is connected to the user system with the user system interface cable,
force must not be applied to the cable head. Position the emulator station, user system interface
cable, and user system as shown in figure 11.
Figure 11 User System Interface Cable Location Example
5. The P1 short connector is for testing. Do not remove the. jumper pin inserted in the side of pin 1
and pin 2.
16

Section 5 Notice

Figure 12 P1 Short Connector