Mitsubishi Electric MELSEC L Series Manual page 233

(c) Devices used for resolution change operation
* Two-/four-word data is used in the four arithmetic operations instruction. Use unused device areas so that existing device
data are not affected by this operation.
Present value
read condition
Point
The scan time is longer by the addition to the sequence program.
When the scaling function described in Appendix 3.2 is used, however, because the scaling operation is
performed in the analog module, the scan time is not affected.
FROMP H0 K11 D0 K1
/P D0 K5 D100
MOVP D100 D0
: D100 and D101
*
Read the present value of Channel 1
from the buffer memory.
Divide the 1/20000 data by five.
Transfer the divided data to the device.
App
- 7