Mitsubishi Electric MELSEC L Series Manual page 183

6
HIGH-SPEED COUNTER MODULE REPLACEMENT
AnS/QnAS series
Product Model
High-speed counter A1SD62D
module A1SD62D-S1
Model
1) External wiring: Terminal block wiring  Connector wiring
Cable size is changed.
2) Number of slots: Not changed
3) Counting speed: 500K, 200K, or 100KPPS
4) Counting range: 32-bit signed binary
LD62D (-2147483648 to 2147483647)
Program does not need to be reviewed.
5) Program: The number of occupied I/O points, I/O signals, and buffer
memory addresses are changed.
6) Performance specifications: Number of channels is 2.
7) Functional specifications: Not changed
1) External wiring: Terminal block wiring  Connector wiring
Cable size is changed.
2) Number of slots: Changed. 0 module (I/O function built in CPU)
3) Counting speed: 200K, 100K, 50K, or 10KPPS
L02SCPU 4) Counting range: 32-bit signed binary
L02CPU (-2147483648 to 2147483647)
L06CPU Program does not need to be reviewed.
L26CPU 5) Program: Incompatible, Need to be created.
L26CPU-BT 6) Performance specifications: External input voltage 24V only
The input terminal filter characteristics are different.
7) Function specifications: Limit switch output function  Coincidence output
function (Two coincidence detection output points can be set.)
No periodic pulse counter function
Transition to L series
Remarks (Restrictions)
6
- 3