Mitsubishi MELSEC Q Series Programming Manual page 754

PSCAN(P)
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The program with the file name specified by
• The file name storage destination device of
device.
• The specified file name is the SFC program, and the SFC program for the other file name
has been already started. (Dual activation error of the SFC program)
(For the Universal model QCPU, LCPU)
(For the High Performance model QCPU, Process CPU, Redundant CPU)
Program Example
(1) The following program sets the program with file name ABC as scan execution type when
X0 is turned ON.
[Ladder Mode]
7-380
does not exist.
S
exceeds the range of the corresponding
S
[List Mode]
Step Instruction
(Error code: 2410)
(Error code: 4101)
(Error code: 4131)
(Error code: 2504)
Device