Mitsubishi MELSEC Q Series Programming Manual page 728

HOUR(P)
Program Example
(1) The following program converts the seconds stored at D0 and D1 into an hour, minute,
second format, and stores the result at devices starting from D100 when X20 is turned ON.
[Ladder Mode]
[Operation]
• Conversion to hour minute, and second format by the HOURP instruction (when the value
40000 seconds has been designated by D1 and D0).
D1,D0
7-354
D100
40000
D101
D102
[List Mode]
Step Instruction
11
6
40
Device