Mitsubishi MELSEC Q Series Programming Manual page 572

DABCD(P),DDABCD(P)
DDABCD
(1) Converts decimal ASCII data stored in the area starting from the device designated by
8-digit BCD data, and stores it into the area starting from the device designated by
S
S +1
S +2
S
+3
For example, if the ASCII code of 87654321
operation results would be stored at
S
+1
S
S +2
S
+3
(2) The ASCII data designated at
(3) The ASCII code set at each digit can be in the range of from "30
(4) If ASCII code for individual digits is from "20
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• There are characters within the data at
• The device specified by
(For the Universal model QCPU, LCPU.)
7-198
b15 b8 b7
ASCII code for millions place ASCII code for ten-millions place
ASCII code for ten-thousands place ASCII code for hundred-thousands place
ASCII code for hundreds place ASCII code for thousands place
ASCII code for units place ASCII code for tens place
b15 b8 b7
37 (7) 38
H H
35 (5) 36
H H
33 (3) 34
H H
31 (1) 32
H H
exceeds the range of the corresponding device.
S
b0
D +1
b31 b28 b27 b24 b23 b20
Hundred
Ten Milli-
milli- ons thou-
sands
ons place
place place
is designated for the area starting from
H
+1 and in the following manner:
D D
b0
(8)
(6)
b31 b28 b27 b24 b23 b20
(4)
8 7
(2)
D +1
to +3 can be in the range of from 0 to 99999999.
S S
" to "00 ", it is processed as "30
H H
that are outside the 0 to 9 range.
S
D
b19 b16 b15 b12 b11 b8 b7 b4 b3 b0
Ten Thou- Hund- Tens Units
thou- sands reds place place
sands place place
place
b19 b16 b15 b12 b11 b8 b7 b4 b3 b0
6 5 4 3 2 1
D
" to "39 ".
H H
".
H
(Error code: 4100)
(Error code: 4101)
to
S
.
D
, the
S