Light Source Menu - Christie DHD599-GS User Manual

Light Source menu

The Light Source menu sets the light source mode and power preferences.
1. Light Source Mode
2. Constant Power
3. Constant Intensity
4. Total Projector Hours
5. Light Sensor
Menu item Description
Light Source Sets the light source mode.
Mode
Constant Power Sets the value of the laser diode power.
Constant Sets the value for the Constant Intensity
Intensity mode to maintain constant brightness.
The light sensor will monitor the light level
and will apply more power as the laser
brightness decays naturally over time. When
the laser setting reaches maximum power of
405W, it will remain at this setting. Note that
the light sensor needs to be calibrated for
Constant Intensity mode to work properly.
Calibration should be performed again after
every laser diode change.
Total Projector Displays the current total number of hours the
Hours projector has been used.
Light Sensor Calibrates the light sensor.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-0 Rev. 1 (12-2017)
Light Source
Constant Power
405
Options
• Constant Power
• Constant Intensity
• ECO mode
—
—
—
—
Operation
50