Christie DHD599-GS User Manual page 43

Menu item Description
Rear Projection Reverse the image so you can
project from behind a
translucent screen.
Menu Sets the on-screen display
Preferences menu preferences, and the
password for the projector.
Power Determines the power modes
Management for the projector.
High Altitude Enables or disables high
altitude mode.
IR Control Enable or disable IR control.
LED Indicator Enable or disable displaying
status LED and keypad LED.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-0 Rev. 1 (12-2017)
Options
—
• Menu Horz Offset—Changes the horizontal position of the on-
screen display.
• Menu Vert Offset—Changes the vertical position of the
on-screen display.
• Show Messages—Displays status messages on the screen.
• Menu Transparency—Changes the on-screen display menu
background to be transparent.
As the value increases, more of the image behind the menu
is visible.
• Splash Screen Setup—Selects the splash screen.
• PIN Protect—Protects your projector with a password. Once
enabled, you must enter the password before you can
project an image.
• Change PIN—Allows you to change the password.
• Standby Mode—Determines if the projector is in standby
mode when connected to AC power (<0.5 W).
• AC Power On—Automatically turns the projector on when
electrical power is connected.
• Auto Shutdown—Automatically turns the projector off after
no signals are detected for a preset number of minutes. If an
active signal is received before the projector powers down,
the image is displayed.
• Sleep Timer—Allows the projector to automatically power off
after it has been on for a specified amount of time (two, four,
or six hours).
• On—Enables high altitude mode for altitudes >/= 2000 m.
The fan operates at high speed to ensure sufficient air flow
for high altitudes.
• Off—Disables high altitude mode. For altitudes below 2000
m.
—
—
Operation
43