Pip/Pbp Layout And Size - Christie DHD599-GS User Manual

Menu item Description
Timing Detection Sets timing detection mode to wide or normal
Mode to support additional PC timings. When the
projected picture is not completed, this
function is used to adjust the picture.
For 4:3 input sources not recognized by Wide
mode (for example 1400 x 1050), perform
Auto Image using Normal mode.
Source Info Displays the current source settings. (Read-
only)
Enable Source Toggles the check box to enable or disable the
Hot-Key main source hot-key.
Source Hot-Key Allows you to assign a different source to the
hot-key. Highlight an input and press ENTER
to choose a different one.
Input Key Lists or changes the sources.
Blank on Signal Blanks the screen before timing is stable when
Switch changing the source.

PIP/PBP layout and size

A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are
the same size.
PIP/PBP Layout
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
PIP-Bottom Right
PIP-Bottom Left
PIP-Top Left
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-0 Rev. 1 (12-2017)
PIP/PBP Size
Small Medium
P P
P
P
P P
P
P
P P
P P
P P
Options
• Normal mode—Supports 4:3 input sources.
• Wide mode—Supports the 16:9 input source
and most 4:3 input sources.
—
—
—
—
• Off—Disables blanking the screen.
• On—Blanks the screen before timing is
stable when changing source.
Large
P
*
P
*
P
*
P *
P
P
P
Operation
54