Christie DHD599-GS User Manual page 60

Panel Description
Network Execute a network factory reset. Network settings may be reset to the following default values.
Factory Reset
Projector Name = Christie@ + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enabled
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• = 255.255.255.0
• Default Gateway = 192.168.1.100
SNMP settings:
• SNMP Read Community = private
• Trap IP Address = 0.0.0.0
• SMTP IP Address = 0.0.0.0
• All other settings are cleared or blanked
Trap Configuration:
• All items = SNMP Trap + Email
LAN Setting • Sets if the projector must obtain an automatically assigned IP address through DHCP or if the
Panel user sets the address manually.
• For the TCP/IP setting, enter the IP address, netmask, and default gateway address.
WLAN Setting • Enables or disables the wireless LAN of the projector.
Panel
• Enter the IP address range, netmask, and default gateway for the wireless LAN.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-0 Rev. 1 (12-2017)
Operation
60