Extract A Range Of Data - Dent ELITEpro XC Operator's Manual

Each time an analysis function is used and File is
selected, Notepad is opened and the result of
the analysis function is added to the existing
Notepad file.
For the first five analysis functions, Average is
the arithmetic average of all the values in the
selected column within the date range of data
selected. Load Factor is the ratio of the peak
(maximum) value divided by the average value.
Maximum and Minimum are the largest and
smallest values together with the day and time
of the occurrence. Total is the algebraic sum of
all the values (useful for summing kWh within a
specified period of time).
5) Select Graph to create a quick line graph for any selected variable and range.
-or-
Select Daily Profile Graph to create a composite average daily profile list of the average data values
computed by ELOG.

Extract a Range of Data

Users may choose options from this sub-menu to display data from a specified range if all data points
collected aren't needed for analysis.

Extract By Date
This option provides the beginning and end date and
times of the data file. Choose new endpoints to trim
off unwanted data at the beginning or end of the file
Click Ok to display the selected range.

Extract By Record Number
This option provides a File Record Range with the
option of choosing a set of records based on the
record number (first column in the data file). Click Ok
to create the selected range.
DENT Instruments
ELITEpro
Best Practices
D Y K ? All analysis features in
ID OU NOW
the Analyze a Selected Data Range and
Extract drop-down menu can be quickly
accessed using the right mouse button.
First use the mouse to select a range of
data for analysis by holding the left
mouse button down over the first record
in the range and then dragging the
mouse until the last record and releasing
the button. Then place the mouse
pointer over the selected range and use
the right mouse button to select your
options.
94