Dent ELITEpro XC Operator's Manual page 65


Graph File—contains graphs created from logger data. Selecting Graph File opens a folder window
where you may choose from already existing data files. Choose the one you wish to use to create a
graph.

Logger List File—displays groups of loggers used with AutoPoll, an automatic data collection
application that is bundled with ELOG. Once chosen, you will be shown the folder where the Logger
Lists reside and be allowed to select one for review or
editing. (Logger Lists are used by AutoPoll for unattended
data retrieval by the computer.)

Setup Table File—If you are not already connected to a
logger, ELOG prompts you to select the logger type
(ELITEpro XC) for which you want to create a new Setup
Table. If you are already connected to a logger, ELOG
assumes that the Setup Table you are about to create is
for the logger type to which you are connected.
File > Open accesses an existing file, prompting you to select the file type. It operates the same whether
or not you are connected to a logger.
The File > Save and File > Save As functions allow for the saving of an open file of any type. Save As
allows for saving to a new location or new name.
The File > Export Data File allows you to export a data file to a .csv file for use in another application.
The File > Import CSV File allows you to import a .csv file into ELOG.
DENT Instruments
ELITEpro
Best Practices
65