Appendix C-Troubleshooting Elitepro Xc Driver Installation - Dent ELITEpro XC Operator's Manual

Appendix C—Troubleshooting ELITEpro XC Driver Installation
If you have connected the ELITEpro XC to a computer via the USB cable and the driver fails to install,
follow these steps to correct the problem.
1) Go to the Device Manager by right-clicking My Computer in the Start Menu and selecting
Properties.
2) In the Properties window, select Device Manager. In Windows 7 and Windows 8, the Device
Manager is on the left side of the window. In Windows XP, select the Hardware tab, then select the
Device Manager. See below.
DENT Instruments
ELITEpro
Windows 7
Windows 7
Appendices
Windows XP
102