Dent ELITEpro XC Operator's Manual page 15

Specification
Wi-Fi Adapter (Optional)
Line Power Supply
Power In (optional)
Operating Temperature
Humidity
Enclosure
Weight
Dimensions
Operating System
Processor
Hard Drive
Communications Port
DENT Instruments
ELITEpro
Internal Wi-Fi adapter with two separate configurations:
Internal antenna/External 5 dbi antenna: typical conditions <40ft up to 100ft
depending on environment and antenna choice.
Power
From L1 Phase to L2 Phase. 80-600V (AC or DC) CAT III DC/50/60Hz, 125 mA, 5 W,
Non-user replaceable .5 Amp internal fuse protection.
6-10 VDC maximum, 500 mA minimum
Mechanical
5% to 95% non-condensing
ABS plastic, 94-V0 flammability rating
340 g (12 ounces, excluding sensors and leads)
69 x 58 x 203 mm (2.7" x 2.2" x 8.0")
Minimum System Requirements
Windows® 7 (32 or 64 bit), Windows® 8, Windows® 10 or Vista (32 or 64 bit)
Pentium Class 1 GHz or more recommended
50 MB minimum available
One USB port required for logger connection and ELOG software installation
Description
or 10 VA max.
-7 to + 60°C (20 to 140°F)
Introduction
15