Call Interval - Dent ELITEpro XC Operator's Manual

Create .csv File—If it is desired to have the downloaded data also be created in a .csv (Comma
Separated Value) format for use in other applications such as Excel, check this box. Creating a .csv does
not affect the original .elog file downloaded from the logger.

Call Interval

Five choices are available for automatic polling and data retrieval however only one Call Interval may be
selected at a time. The choices are:
Immediate Call—Calls the logger as soon as the AutoPoll program is initiated. Use this to test the system
after completing a logger installation to verify correct operation.
Single Call—Use this option to make a one-time call and data retrieval from a logger. Use the Single Call
Date/Time box to set the month and day (mm/dd), and hour and minute (hh:mm) the call is to be made.
Multiple Calls—Use this option to make multiple calls to a logger in the same day. The First Call Time is
when AutoPoll first calls the logger. AutoPoll then calls the logger at the interval set in: Then Call Every.
The time of the first call happens on the first day that the call out time is encountered after the Logger
List has been saved.
Daily Call—Use this option to call the logger every day at the
same time. Use the Daily Time To Call box to set the hour and
minute (hh:mm) that the call is to be made.
Weekly Call—Use this option to configure the host computer to
call the logger on one or more days every week. Use the Weekly Times To Call box to select the days and
the hour (hh) and minute (mm) the calls are to be made. Only one call per day is permitted but they can
be at different times on different days.
DENT Instruments
ELITEpro
Appendices
D Y K ? Click on the
ID OU NOW
arrows to change to the desired
value for any of the times (days or
months).
114