Amendment Register - Procon A1M Installation Manual

Amendment Register

Latest
Document
Firmware
Version
Version
1.0.0 3.0.0
1.0.1 3.0.1
1.0.2 3.0.1
1.0.3 3.0.1
1.0.4 3.0.6
1.0.5 3.0.11
1.0.6 3.0.11
1.0.7 3.0.12
1.0.8 3.0.12
1.0.9 3.0.12
1.0.10 3.0.12
1.0.11 3.0.13
1.0.12 3.0.13
1.0.13 3.0.13
1.0.14 3.0.13
1.0.15 3.0.15
1.0.16 3.0.15
Any additional notes since printing will be appended to the rear of this document on separate
sheets of paper.
Date Author
08/05/15 GD Initial version for firmware V1.0.0
Added 'Applicable Unit Type' columns to Air-To-Water Modbus
16/06/15 GD tables.
Other minor modifications.
More FTC5 model types added to 'Appendix B - Compatible Air-To-
20/08/15 GD
Water units'.
FTC5 controller type PAC-IF062B-E added to 'Appendix B -
20/08/15 GD
Compatible Air-To-Water units'.
Added ATW Modbus registers for measured energy consumed and
19/01/16 GD
measured energy produced.
15/06/16 GD Changes to BACnet section.
23/08/16 GD Minor changes.
01/08/16 GD Added Flow Rate Modbus registers for ATW units.
Added warning paragraph on page iii.
21/10/16 SC / GD
Added MET lab logo.
14/11/16 GD Updated MET lab logo.
24/04/17 GD Updated Appendix A – Compatible Air-To-Air units
19/06/17 GD Latest firmware version updated to 3.0.13
Added information to Installation section regarding connections to
twin/triple/quad and MXZ systems.
31/07/17 GD
Correction made to section 2, the name MAC-399IF replaced with
MAC-333IF.
Modbus tables updated for QAHV units.
25/08/17 GD
QAHV-N560YA-HPB added to the compatible units list.
Modbus tables updated for EAHV units.
01/11/17 GD Numerous changes to Modbus tables due to updated protocol
documentation.
Added new Modbus tables for Lossnay units (firmware version must
be 3.0.15 or later).
Added firmware revision history table.
08/11/17 GD
Updated image in Figure 1.
Modbus tables now have row headings at the top of every page.
Added text to section 2.Overview
Updated Modbus tables and Lossnay unit compatibility list. VL
13/02/18 GD
series Lossnay unit are not supported.
• v •
Notes