KoamTac KDC20 User Manual page 66

K K DC User KDC
YOUR
-
-
Data Editor
The KDC provides various data editing options.
z
Prefix - Enables user to add a prefix to scanned data that may then be wedged to the host.
The Prefix must be defined in the KTSync. The maximum length for a Prefix is 11 characters.
This Prefix option is different from the Prefix option in KTSync, which attaches the
prefix to data during synchronization.
The user may also define the prefix by scanning characters defined in Appendix
C&D(E&F for KDC500). as shown below in the special barcodes.
KDC20/100/200/250/300/270L/350L/410/411/415/470L/500L
KDC30/270C/350C/420/421/425/450/470C/500C
4 bytes index would be added before "@" when responding to "p" command.
4 bytes index plus "@" character would be added after checksum byte if the
user scans a barcode and wedges to the host.
Prefix/Suffix Enter Finish
Prefix Enter Start
Prefix/Suffix Enter Finish
Prefix Enter Start