Synchronization Methods - KoamTac KDC20 User Manual

K K DC User Manual
Select from Current Running Application – This option enables the user to select a currently
z
running application for data synchronization.
• Data synchronization begins immediately if "Automatically Synchronize after
• Users SHOULD NOT operate the PC during the synchronization process. It may

Synchronization Methods

Fast Synchronization in Burst Mode
The KDC may synchronize data to a host device in Burst mode or Sequential mode. Burst mode
provides the fastest synchronization process but could result in error in a poor Bluetooth
environment. Fast synchronization in Burst mode is only recommended with USB connection.
Synchronize Normal Data
If Synchronize Normal Data option is selected, the KDC will synchronize only Normal Data in KDC
memory. If the user wants all data in KDC memory synchronized, the user should select Synchronize
Normal Data and Synchronize Application Data.
Synchronize Application Data
If Synchronize Application Data option is selected, the KDC will synchronize only Application Data in
KDC memory. If the user want all data in KDC memory synchronized, the user should select
Synchronize Normal Data and Synchronize Application Data.
Clear KDC Memory after Synchronization
If this option is selected, the stored barcode data is cleared from the KDC memory after
synchronization.
It is important to clear the KDC memory periodically to prevent a Buffer Full message. Buffer
z
Full prevents the KDC from storing additional data. Stored barcode data may also be deleted
using the Reset Memory feature on the KDC.
Automatically Synchronize after Connection
Connection" is selected. If not selected, data synchronization is started manually
by the user.
interrupt the process causing unreliable results.
S
YNCHRONIZATION