Bt Config Menu - Kdc20/30/200/250/300/270/350/400/500 - KoamTac KDC20 User Manual

K K DC User
YOUR
BT Config Menu – KDC20/30/200/250/300/270/350/400/500
The KDC supports Bluetooth Ver2.1+EDR. Before utilizing the advantages of Bluetooth functionality
with the KDC, the user should become familiar with Bluetooth connectivity and its impact on the
host environment.
To configure your KDC for Bluetooth functionality, you may use the KDC Menus.
Below is a listing of the Bluetooth options and their settings. The default settings for these options
have been set to increase the usability of Bluetooth technology without compromising the KDC
battery usage.
IMPORTANT: We strongly recommend NOT changing these settings until the user has
fully tested the Bluetooth connection between the KDC and the host device.
For more detailed information regarding Bluetooth functionality with the KDC, please refer to
Chapter 4. BLUETOOTH.
ConnectDevice
You may choose the Bluetooth device type in this option.
z
HID normal - KDC20(i)/30(i)/200(i)/250(i)/300(i)/270(i)/350(i)/400(i)
z
HID iOS - KDC20(i)/30(i)/200(i)/250(i)/300(i)/270(i)/350(i)/400(i)
z
SPP2.0 - KDC20(i)/30(i)/200(i)/250(i)/300(i)/270(i)/350(i)/400(i)
z SPP - KDC20(i)/30(i)/200(i)/250(i)/300(i)/270(i)/350(i)/400(i)/500(i)
z MFi - KDC20i/30i/200i/250i/270i/300i/270i/350i/400i/500i
Auto Connect
Enabled or Disabled(KDC500 doesn't support)
Auto Reconnect
Enabled or Disabled
Auto Power On
Enabled or Disabled(KDC500 doesn't support)
PWR On Time
Disabled, 1 to 10 seconds(KDC500 doesn't support)
Auto Power Off
Enabled or Disabled (KDC250G/350G should use option in system menu)
(KDC500 doesn't support)
KDC