KoamTac KDC20 User Manual page 70

K K DC User KDC
YOUR
start position and number of characters to be stored and/or transferred. The user also can
select if taking or erasing the characters selected with Start position and No of char(s).
¾ Start position
‹ This option specifies the start position of data.
¾ No of char(s)
‹ This option specifies the length of data. The '0' means all data.
¾ Action
‹ This option selects if erasing or taking the specified data.
Handshake(KDC500 doesn't support it)
KDC provides Handshake mode when Data Format is set to Packet Data.
z
Handshake Mode will increase the reliability of barcode data transmission.
z
The default mode for Handshake is disabled.
z Data transmission speed is slower when Handshake Mode is enabled.
Terminator
The KDC supports various termination characters when the Data Format mode is set to Barcode
only. Select <NONE>, <CR>, <LF>, <CR+LF>, or <TAB> as the termination character. The default
terminator is <CR+LF>. The Up/Down/Left/Right arrow terminator is also available for HID mode.
Chk Duplicate
This option prevents you from collecting duplicate data.
Enter Key (KDC350/500 only)
This option determines the behavior of the '#' key on the keypad.
z If this option is enabled, the '#' key acts as a keyboard enter key.
¾ The '#' key finishes the current data input, and stores/sends input data according to
the menu settings of Wedge/Store.
¾ The cursor moves to next line after the current data input is complete, regardless of
whether there is a data input or not.
¾ The screen is scrolled up one line if the '#' key is pressed on the last line of KDC screen.
¾ If 'Shift' is enabled, remember that the '#' key will input the '#' character.
Extend Key (KDC350/500 only)
This option enables users to enter more symbols by using keypad.
Age Verification (KDC30/300/270C/350C/420/421/425/450/470C)
This option enables to verify age by reading driver license.