Sensitive Menu - Kdc500 - KoamTac KDC20 User Manual

K K DC User KDC
YOUR
Sensitive Menu – KDC500
KDC500 Sensitive menu has sub menus which can impact on the KDC500 security services. KDC500
requires two passwords for the Sensitive menu group access in order to ensure only authorized
people can utilize the sensitive services. The default passwords are 0000000 and 11111111.
x For PCI PTS compliance, the default passwords should be changed prior to use. Without
the default passwords change, KDC500 declines all the payment related service
requests; such as MS Card Read, IC Card Insertion, PIN Entry, etc.
Set Date/Time
In this menu, the user can set the date and time of the KDC500.
Set Self-Test
The user can set the time for the Self-Test in this menu. In PCI PTS, it requires to perform the Self-
Test(Firmware and stored key authentication) at least once in 24 hours.
Set Passwords
In this menu, the user can change the current passwords to access the Sensitive Menu.
Key Mgmt
z
Stored Keys : Displays all the encryption keys stored in the KDC500.
z
Inject Keys : In this menu, the user can inject the necessary encryption keys via Key Loader
device.
z
Clear Keys : In this menu, the user can clear all the encryption keys stored in the KDC500
except the Firmware Update Authentication key which is loaded during the manufacturing
process.
Card Encrypt
This menu allows user to choose the encryption algorithm for the sensitive card data from the list
below.
z Plaintext
z T-DES
z AES