KoamTac KDC20 User Manual page 125

K K DC User Manual
z
File: The KTSync makes a file name based on 3.11 if file name is specified as an
"sn_timestamp.txt". The default directory is /Users/Shared/KTSyncData directory. The
user may define another directory or another filename by clicking the "New" button. The
maximum file path length is 128 characters.
z
Internal Viewer: The KTSync displays barcode data in KTSync internal text viewer.
z
Active Window: The KTSync sends barcode data to current active window if Active window
option is selected.
z User Application: The user may define the target application by pressing the "New" button.
The maximum application name path length is 128 characters.
Synchronization Options
z
Synchronize KDC Clock
KTSync will set the KDC's date and time with Mac PC date and time when the KDC is
connected to Mac, if this option is enabled.
z
Burst Synchronization
KTSync will synchronize barcode data from KDC in burst mode. Otherwise, KTSync would
synchronize barcode data one by one. This option is enabled by default and maynot be
disabled.
z
Synchronization on Connection
KTSync will automatically synchronize barcode data from the KDC when the KDC is
connected, if this option is enabled.
z Clear KDC Memory After Synchronization
KTSync clears barcode data stored in the KDC's memory once synchronization has finished,
if this option is enabled.
z Append Data to File
KTSync appends synchronized data to existing file specified on destination. If file does not
exist then KTSync creates a new file.
Data Edition
z
Attach Serial Number
The KTSync will add a KDC serial number to barcode data. This option is enabled by default
and maynot be disabled.
z
Attach Time Stamp
The KTSync would add timestamp to barcode data. This option is enabled by default and
maynot be disabled.
z
Attached Barcode Type
The KTSync would add barcode type to barcode data. This option is enabled by default and
maynot be disabled.
S
YNCHRONIZATION