3.5 Beep Warning
The KDC beeps to acknowledge the status of the Bluetooth connection as follows:
1. One (1) high short beep when Bluetooth is connected.
2. One (1) low short when Bluetooth is disconnected.
3. Five (5) short beeps if:
•
"Beep Warning is ENABLED"
•
"Auto Power Off is DISABLED"
•
"KDC200/200P/300 is DISCONNECTED from HOST"
•
"Bluetooth power is ON"
3.6 PWR OFF Time
The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is
Enabled, the KDC powers off Bluetooth when the time duration specified in the PWR Off Time option is met
and the KDC is NOT CONNECTED to the host. The time settings for this option are from one (1) minute to
30 minutes. The default is five (5) minutes.
26
KDC300 User Manual