KoamTac KDC20 User Manual page 37

K K DC User Manual
2.
On the host device, go to Settings -> Bluetooth, and select the KDC that needs to be paired. The
KDC and host device will now communicate with each other.
Settings
For PCI PTS compliance, KDC500 requires Numeric Comparison method.
If the host device and KDC500 shows the same 6digit
number, press Pair/YES button on each device.
3.
After it has been installed, open KTSync and it will automatically find and connect to the KDC.
(Refer to 2.2 KOAMTAC Installation Wizard for more information about installing KTSync).
Second Option: Connect the host device from the KDC by scanning a Special Bluetooth MAC
Address barcode
Tap B B luetooth
Installation
Tap the KDC