Uhf Tag Counting (Beep Count) - KoamTac KDC180 Quick Manual

3.4 UHF Tag Counting (Beep Count)

By setting the Count attribute, you can get an estimate of how many tags are read per beep.
•
Count = 0: The device only beeps once when you start reading
•
Count = 5: Beeps once every 5 tags read.
•
Count = 10: Beeps once every 10 tags read.
•
Count = 20: Beeps once every 20 tags read.
•
Count = 50: Beeps once every 50 tags read
Scan the barcode on below that corresponds with your preference for Tag Counting.
Count = 0
Count = 10
See Reference Manual for more detailed information
Visit store.koamtac.com
Active Read 10 Minute Timeout
Enabled (Default)
to purchase additional products and accessories.
Quick Guide
Example: 2 beeps means you read 10 to 14 tags.
Example: 2 beeps means you read 20 to 29 tags.
Example: 2 beeps means you read 40 to 59 tags.
Example: 2 beeps means you read 100 to149 tags.
Count = 50
KDC180
Disabled
Count = 5
Count = 20
QG_KDC180_20201014 p8