i
10. Menu 1 - Configuring the sun function
Sun function
The awning extends or the shutter
closes completely.
i
After
10 minutes
The sun function can only be used for sun shading actu-
ators. It may be necessary to set a running time on the
actuator so as to be able to use the sun function.
The sunshine position of the logged-on actuators is auto-
matically set to 100 % by the sun/wind sensor. The awning
fully extends accordingly in the case of sun or the shutter
closes completely. The sunshine position can be changed
manually. Either directly on the device or using a DuoFern
control depending on the actuator.
The awning retracts or the shutter
opens.
EN
After
20 minutes
17