Pump Capacity Or Setting Standby - Lauda Integral XT 150 Operating Instructions Manual

Master
or
02%02
Command
T °C
set
25,
T °C
ext
25,
Pump Menu

7.9.3 Pump capacity or setting standby

With the Integral XT Vario pump, 8 pump levels are available with which the flow rate and pressure, the
noise generated and the mechanical heat input can be optimized. See (þ 7.15.7.3).
Master
and 1 x
Pu 5
or
wait 4 seconds or
60
EXT
-
Switches to the actual-value display of the external temperature
probe (or to the actual value received from an interface module
(þ 8)).
-
EXT is lit in green next to the row of figures.
-
If no external Pt100 probe is connected,
°C -----
EXT
Level
8
00
T °C
out
25,
01
Pump
P
int
02 Step 3
Screen T
set
Pu
-
Call pump power levels display
-
The current pump level is displayed (here
°C
-
The pump levels display flashes.
-
Select pump level (pump speed = pump power):
1
0
-
machine are deactivated).
-
Display flashes 4 s à new value is automatically accepted, or
-
value is immediately accepted with Enter key.
is displayed.
T
ext
-
Provided an external temperature probe is
connected, its value is displayed in the
lower left part of the standard and super
windows (applies to the works setting for
the window partitioning).
-
External actual temperatures can also be
read in via interface modules
(þ 8).
2,00bar
T
fix
8
to for pump operation. Pump responds immediately!
activates the standby function (pump, heater and refrigerating
Starting up
Integral XT
Pu
.
5
).
YAWE0028 / 24/06/2016