Lauda Integral XT 150 Operating Instructions Manual page 60

Command
Enter new setpoint:
Min: -40.00°C Max:202.00°C
1
Help 6 Menu
Fixed settings
0.00°C
0.00°C
0.00°C
0.00°C
0.00°C
0.00°C
0.00°C
0.00°C
Pump Menu
58
123,
45
2 3 4
7 Screen 8 T 9
set
Recent setpoints
80.00°C
-35.50°C
20.00°C
38.00°C
-35.70°C
0.00°C
0.00°C
0.00°C
End T
set
T
set
-
setpoint window.
-
123.45 is the setpoint which is still active.
The upper and lower limit temperatures
are displayed (device-specific values).
There are three different possible entry
methods:
1. Change the value with the
keys. First you vary the 1/10°C values. If
you hold the key pressed longer, then full
degrees change.
2. Enter the complete number with the nu-
5
merical duo keys and the
T 0
negative sign and decimal point.
fix
3. Using
line to the decimal place which you would
like to change and then change it with
-
Confirm the value with
window with
changes.
Two other ways of entering the setpoint:
-
With the soft key
window shown on the left.
-
The setpoints which you last entered are
shown in the right-hand column. In the il-
lustrated screen the last setpoint was
80.0°C.
-
To accept an earlier setpoint, enter the
right-hand column with
desired value with
Edit
-
In the left-hand column, setpoint temper-
atures which are to be used frequently
can be defined as "fixed settings".
Starting up
or T
fix
or the soft key T
set
or , move the flashing cursor
or .
without having made any
T
fix
, then accept it with
or cancel with .
YAWE0028 / 24/06/2016
Integral XT
opens the
or
key for the
or quit the
open the
and select the