Lauda Integral XT 150 Operating Instructions Manual page 102

Command
Control Parameters
Control para. sets
Tv manual/auto
Self Adaption
Correction limitation
Pump Menu
Status
intern
extern
Pump Menu
Editing the control parameter sets
The change in the control parameters is explained in Section 7.15.3 / 7.15.4 (internal / external). Once
the value has been changed and confirmed, the set number, e.g.
value is accepted into the control parameter set to be changed (Set 3) via the command
Control parameter sets
100
Set 1
Set 2
Set 3
Set 4
Set 5
Set 6
Set 7
Set 8
Set 9
End T T
set
Activate
Upload actual
Default
End T T
set
.
Starting up
Control parameter sets
-
Open the device parameter menu via
the soft key
-
With the cursor keys continue to:
à
Control
Control para. sets
-
The adjacent window appears.
Set 1 to Set 9.
-
Select the desired set with
firm with
-
Select the desired set to be changed
fix
with
-
In the setting window (see left) the se-
lected set is listed under
external
-
Under
set:
is activated,
is read in and
the set, which was saved at the factory,
is restored.
fix
Set 3
Integral XT
Menu .
à
Control Parameters
.
.
and confirm with
internal
in the display.
Status the previously selected
and Upload actual , the new
YAWE0028 / 24/06/2016
à
and con-
.
or