Im50/Im80 Configuration; Operating And Navigating - EDAN iM80 User Manual

Patient Monitor User Manual
1
2
3
4
5
6
7
8
9
10
11
12
13

3.1.3 iM50/iM80 Configuration

iM50/iM80 configuration is listed as below:
Model Size (L×W×H)
iM50 260 mm (L) × 140 mm (W) × 205 mm (H) Square
iM80 370 mm (L) × 175 mm (W) × 320 mm (H) Square

3.2 Operating and Navigating

Everything you need to operate the monitor is contained on its screen. Almost every element on
the screen is interactive. Screen elements include measurement numerics, waveforms, screen keys,
SD Card
Nurse call port, this port is connected to the call system. When
there is an alarm, the monitor outputs nurse call signal to notify
the nurse.
Defibrillator synchronization / analog output. When the user
selects Analog Output, the monitor outputs the waveform
through the auxillary output port. When the user selects
Defibrillator, the
synchronization signal through the auxillary output port.
VGA output
USB interface, this port is used to connect the USB device.
RS232 interface
Network interface, this port is used to connect to the central
monitoring system through the standard network wire.
Anti-theft lock interface
Heat emission hole
Security lock, used to prevent the power supply cord from falling.
Equipotential grounding terminal, if the monitor or other
processing unit are used in internal examinations on the heart,
ensure that the room incorporates an equipotential grounding
system to which the monitor and other processing unit have
separate connection.
Speaker
Fan
monitor outputs
Figure
- 15 -
Basic Operation
the defibrillator
Function
Configuration
ECG, RESP, SpO
NIBP, IBP ,TEMP,
Quick TEMP , CO
2
ECG, RESP, SpO
NIBP, TEMP, IBP,
C.O., CO , AG
2
,
2
,
2