EDAN iM80 User Manual page 24

Patient Monitor User Manual
or flash. The color of light represents the alarm level.
2 Power supply switch — when the monitor is connected to the AC power
supply, press the key to turn the monitor on. When the monitor is turned
on, press the key to turn the monitor off.
3 Battery indicator, refer to Section Battery Indicator for details.
4 Mute — Press this button to pause the alarm. All the audio alarm will be
closed. At the same time, the message of Temporary Alarm Mute **s
and the symbol
repress it or the pause time is over, the system will resume the normal
monitoring status, and the message of Temporary Alarm Mute **s and
icon will vanish. Symbol
or holding the button again can resume the alarm.
Further Alarm Mute information can be found in the chapter Alarm
Mute.
5 Start / Stop NIBP measurement — Press this button to inflate the cuff
and start blood pressure measurement. During the measurement, press the
button to stop the measurement.
6 Trend Key — Press this button to enter trend table review interface.
7 Freeze /Unfreeze — In normal mode, press this button to freeze all the
waveforms on the screen. In Freeze mode, press this button to restore the
waveform refreshing.
8 Start / Stop Recording — Press this button to start a real-time recording.
During the recording, press this button again to stop recording.
9 Menu — Press this button to return to the main interface when there is no
menu open.
10 Rotary Knob (hereinafter called knob) — The user can rotate the knob
clockwise or anticlockwise. This operation can make the highlighted item
shift up, down, left or right to choose the desired item. Remember, when
using the knob, rotate this button to highlight, and press it to select the
item.
will be displayed in the information area. When you
is shown in the information area. Pressing
- 13 -
Basic Operation