Chapter 20 Review; Trend Graph Review; Selecting Trend Graph Of Specific Parameter; Setting Resolution - EDAN iM80 User Manual

Patient Monitor User Manual

Chapter 20 Review

The monitor provides 120-hour trend data of all parameters, storage of 1200 NIBP measurement
results and 60 alarm events. This chapter gives detailed instruction for review of all data.

20.1 Trend Graph Review

■
The latest 1-hour trend is displayed every 1 or 5 seconds.
■
The latest 120-hour trend is displayed every 1, 5 or 10 minutes.
To review Trend Graph, please press the Trend Graph key on the screen or select Menu >
Review > Trend Graph, then the trend graph interface is displayed.
In the trend graph, the y-axis stands for the measurement value and x-axis stands for the time.

20.1.1 Selecting Trend Graph of Specific Parameter

The monitor can review trend graph of different parameters. To change the existing trend graph,
please select Menu > Review > Trend Graph and select a required parameter name from the
popup list (as shown in red text in the above figure).

20.1.2 Setting Resolution

The monitor can support five kinds of resolutions. To set an apprioate resolution, please select
Menu > Review > Trend Graph and an interface is displayed. Choose Resolution on the
interface to open the list and select an apprioate resolution among 1 sec, 5 sec, 1 min, 5 min and
10 min.

20.1.3 Scrolling Left and Right the Screen

All trend graphs can't be displayed on the current screen due to the screen limitation. The user
- 115 -
Review