Patient Monitor User Manual
Chapter 22 Recording
22.1 General Information
A thermal dot matrix recorder is used for the monitor and can support many recording types and
output patient information, measurement data, review data waveform and so forth.
1
2
3
4
22.2 Performance of the Recorder
Waveform record is printed at the rate of 25 mm/s or 50 mm/s.
48mm wide printout paper.
It can record up to three waveforms.
User-selectable real-time recording time and waveform.
Auto recording interval is set by the user, and the waveform is in accordance with the real
time recording.
NOTE:
It is suggested that the user should not use the recorder when the low battery displays, or
the monitor may be turned off automatically.
1
3
4
Recording indicator
Recording key, press this key to start or stop recording task.
Paper outlet
Recorder Door
- 121 -
Recording
2