Omron CS1W-CT041 Operation Manual page 118

H#>)"D-=<<)$%'()*
n+30, n+31 00-15
n+32, n+33 00-15
n+34 00
01
02
03
04
05
06
07
08-09
10
11
12-14
15
Counter 3 (CS1W-CT041 only)
Ranges /
Comparison Values
active**
Counter Value
Counter Overflow
Counter Underflow
Counter Running /
Gate Open
Counting Direction
Preset Activated
Reset Activated
Capture Activated
Z-signal Activated
---
Rate Range 0**
Rate Range 1**
---
Simple Counter
** Bit(s) have no function for Simple Counters.
***The Reset, Preset, Capture and Z-signal Activated Bits are ON for exactly one
PLC-cycle after the occurrence of a (short) pulse which was detected since the
previous I/O Refresh.
Ranges Active (=1) / Inactive (=0) /
Comparison Values Active (=1) / Inactive (=0)
Counter Value
Counter Overflow (=1), Upper Count Limit of Linear
Counter is reached
Counter Underflow (=1), Lower Count Limit of Linear
Counter is reached
Counter Running/Gate Open (=1),
Counter Stopped/Gate Closed (=0)
Counting Direction, Down (=0) / Up (=1)
Preset Activated (=1)
Reset Activated (=1)
Capture Activated (=1)
Z-signal Activated (=1)
Not used
Rate Range 0 Active (=1)
Rate Range 1 Active (=1)
Not used
Simple Counter (=1) / Circular/Linear Counter (=0)
Section 4-2
$-&