Omron CS1W-CT041 Operation Manual page 32

6&($7-3'%"'-84-9#1#"#*$#-:&(.#
Simple Counter
7
• Software Reset Bit
8
• No (=default)
9
• No (=default)
10
• No (=default)
11
• 50 kHz (=default)
12
• No (=default)
13
• Captured Counter Value
• Counter Value
• Error Clear
14
2
• No*
(=default)
15
3
• No*
(=default)
Reset Signals
Programmable Output Pulses
Rate Measurement
Hysteresis
Noise Filtering Digital Inputs and Counter Inputs
Initial Counter Value
Supported IORD / IOWR-instructions to read / write
Interrupts of Outputs
Interrupts of Digital Inputs
1
* The 500 kHz filter can only be configured for the Counter Inputs (not for the Dig-
ital Inputs).
2
* If in a mixed configuration of Simple/Circular/Linear Counters one or more of
the Digital Outputs have been configured to have Interrupt functionality, then
this functionality is applied to the Outputs, both if they are controlled manually
as well as automatically.
3
* If in a mixed configuration of Simple/Circular/Linear Counters one or more of
the Digital Inputs have been configured to have Interrupt functionality, then this
functionality is applied to the Inputs on a rising or falling edge depending on the
Digital Input Function for which the Digital Inputs have been configured.
Circular / Linear Counter
• Software Reset Bit
• Digital Input
• Z-signal
• Yes
• Yes
• Yes
• 10 kHz
• 50 kHz
1
• 500 kHz *
• Yes
• DM-data
• Range- and Comparison Data
• Captured Counter Value
• Rate History Log File data
• Counter Value
• (Re) Configure Unit
• Error Clear
• Yes
• Yes
Section 1-4
Reference
section
3-6
3-6
3-7-1
3-7-1
3-7-2
3-7-2
3-7-3
3-7-3
3-7-4
3-7-4
3-7-5
3-7-5
4-5
4-5-1
4-5-2
4-5-3-1
4-5-3-2
4-5-3-3
4-5-3-4
4-5-3-5
4-6-1
4-6-1
4-6-2
4-6-2
$*