Omron CS1W-CT041 Operation Manual page 114

H#>)"D-=<<)$%'()*
CIO Output Words
Word Bit
(output)
n 00-03
04-14
15
n+1 00
01 – 15
n+2 00
01
02
03
04
05
06-15
n+3, n+4 00-15
n+5 00
01
02
03
04
05
06-15
n+6, n+7 00-15
The 14 Output Words (n to n+13) are divided in 5 groups: General, Counter 1,
Counter 2, Counter 3 and Counter 4.
Item
Manual Output
Control
---
Automatic/Manual
Read Next Error
---
Open Gate*
Close Gate*
Preset
Reset
Capture
Reset Enable**
---
Preset Value
Open Gate*
Close Gate*
Preset
Reset
Capture
Reset Enable**
---
Preset Value
* Initially, after power-up or restart of the Unit, the Gate is closed. To enable
counting pulses, first open the Gate by setting the "Open Gate" bit of the
corresponding counter to '1'.
**Bit(s) have no function for Simple Counters.
General
Force ON (=1) / OFF (=0) Digital Outputs [0-3]
Not used
Automatic (=0) Digital Output Control /
Manual (=1) Digital Output Control
Read next error at the rising edge (from the error
list in the High-speed Counter Unit). The error code
can be read from CIO-words n+17 and n+18.
Not used
Counter 1
Open Gate (0→1)
Close Gate (0→1)
Load Preset Value (0→1)
Reset Counter (Forced Reset) to zero (0→1)
Capture Counter Value (0→1)
Enable Resetting for Z-signal / Digital Input (=1)
Not used
Preset Value
Counter 2
Open Gate (0→1)
Close Gate (0→1)
Load Preset Value (0→1)
Reset Counter (Forced Reset) to zero (0→1)
Capture Counter Value (0→1)
Enable Resetting for Z-signal / Digital Input (=1)
Not used
Preset Value
Section 4-2
Function
,,