Sega TARGET BRAVO Operators & Service Manual page 81

DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
Error 0906
Sound Function Not found
The RINGWIDE sound function cannot be recognized.
Contact the office listed in this manual or the point of purchase for this
product.
Error 0907
Not Enough System Memory
RINGWIDE does not have enough memory.
Contact the office listed in this manual or the point of purchase for this
product.
Error 0908
Not Enough SRAM
RINGWIDE does not have enough SRAM.
Contact the office listed in this manual or the point of purchase for this
product.
Error 0909
Not Enough Storage Device
RINGWIDE does not have enough storage.
Contact the office listed in this manual or the point of purchase for this
product.
Error 0910
Wrong Resolution Setting
The game does not support the current resolution settings.
Change the DIP SW to the correct settings and restart the RINGWIDE.
Error 0911
Wrong Horizontal/Vertical Setting.
The monitor horizontal/vertical settings are incorrect.
Change the DIP SW to the correct settings and restart the RINGWIDE.
Error 0949
Keychip Not Found
Failed to access the key chip.
Check that the key chip is connected correctly.
Error 6401
JVS I/O board is not connected to main board.
(1) The I/O board is not connected.
(2) Unreliable connection between the game board and the I/O board.
(1) Connect the I/O board to RINGWIDE.
Check that the power cable is connected to I/O board.
(2) Reconnect or replace the JVS cable that connects the I/O board to
RINGWIDE.
Error 6402
JVS I/O board does not fulfill the game spec.
The correct I/O board is not connected.
Use an I/O board that provides the proper input/output for the game.