Sega TARGET BRAVO Operators & Service Manual page 10

2 PRECAUTIONS REGARDING INSTALLATION
• This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric
shock, injury and/or malfunction.
• Places subject to rain or water leakage, or places subject to high humidity in
the proximity of an indoor swimming pool and/or shower, etc.
• Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
• Places filled with inflammable gas or vicinity of highly inflammable/volatile
chemicals or hazardous matter.
• Dusty places.
• Sloped surfaces.
• Places subject to any type of violent impact.
• Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.
• Areas where the temperature exceeds the applicable temperature (ambient
temperature) range of 5 to 30 degrees centigrade.
LIMITATIONS OF USAGE
• Be sure to check the Electrical Specifications. Ensure that this product
compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the
product. Noncompliance with the Electrical Specifications can cause a fire and
electric shock.
• This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a fire and electric shock.
• Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).
Noncompliance with the Electrical Specifications can cause a fire and electric
shock.
• Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of fire if a power surge occurs.
• Putting many loads on one electrical outlet can cause generation of heat and
a fire resulting from overload.
• When using an extension cord, ensure that the cord is rated at 15 A or higher
(AC 100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a
cord rated lower than the specified rating can cause a fire and electric shock.
is