Sega TARGET BRAVO Operators & Service Manual page 55

6-4 REPLACING THE SOLENOID
1
Refer to 14-2 REMOVING THE CONTROLLER SUPORT" and 14-3 " REMOVING THE SCOPE,"
"
take off the controller support and scope body.
2
Refer to Step 2 of 14-4 "REPLACING THE MICROSWICH" and take off the cover L.
3
Disconnect the 1 connector.
CONNECTOR (1)
SM2P
4
Remove the 4 screws and take off the solenoid. Be careful not lose the spring and other small parts.
SCREW (4)
M4 x 6, w/spring washer
SOLENOID