Sega TARGET BRAVO Operators & Service Manual page 53

6-3 REMOVING THE MICROSWITCH
There are microswitches for the trigger and shot selector and action button inside the control unit.
1
Refer to 14-2 "REMOVING THE CONTROLLER SUPPORT " and 14-3 "REMOVING THE SCOPE," take off
the controller support and scope body.
2
Place cover R face down on the work surface and remove the 15 screws to take off the cover L.
3
Remove the microswitch from the R cover.
MICROSWITCH FOR
ACTION BUTTON
509-5080
MICROSWITCH FOR SHOT SELECTOR
509-5080
SCREW (15)
M3 x 12, w/flat & spring washers
COVER L
MICROSWITCH FOR
TRIGGER
509-5080