Sega TARGET BRAVO Operators & Service Manual page 95

13 WIRE COLOUR CODE TABLE
The DC power wire color for this product is different from previous SEGA titles. Working
from the previous wire colors will create a high risk of fire.
The color codes for the wires used in the diagrams in the following chapter are as follows.
A PINK
B SKY BLUE
C BROWN
D PURPLE
E
LIGHT GREEN
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric
characters.
1
RED
2
BLUE
3
YELLOW
4
GREEN
5
WHITE
7
ORANGE
8 BLACK
GRAY
9
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-
hand side numeral (see the above).
Note 1: If the right-hand side numeral is not 0, that particular wire has a spiral color code. The left-
hand side character shows the base color and the right-hand side one, the spiral color.
Note 2: The character following the wire color code indicates the size of the wire.
U :
K :
L :
None :
<Example> 51.........WHITE/RED
AWG16
AWG18
AWG20
AWG22
RED WHITE