Sega TARGET BRAVO Operators & Service Manual page 38

JVS INPUT TEST
Use the JVS INPUT TEST to test the JVS input.
The hexadecimal input information from the JVS I/O board will be displayed in real time.
■ JVS INPUT TEST Screen
NODE
SYSTEM
PLAYER
PLAYER
COIN 1
COIN 2
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG
ANALOG
NOTE: The screen display will vary depending on the I/O board that is connected.
The figure above is one example.
The following information is displayed on this screen.
SYSTEM
PLAYER
COIN
ANALOG
ROTARY
Press the SERVICE and TEST Buttons simultaneously to return to the JVS TEST screen.
JVS TEST
INPUT TEST
1/*
00
1 0000
2 0000
0000 ROTARY
0000 ROTARY
0 0000
1 0000
2 0000
3 0000
4 0000
5 0000
6 0000
7 0000
PRESS TEST BUTTON AND
SERVICE BUTTON TO EXIT
System switch input data
Player number and player switch input data
Slot number and coin input data
Channel number and analog input data
Rotary number and rotary input data
ROTARY 0
ROTARY 1
ROTARY 2
3 0000
4 0000
ROTARY 5
ROTARY 6
ROTARY 7
0000
0000
0000
0000
0000
0000