Sega TARGET BRAVO Operators & Service Manual page 58

CLEANING THE COIN SELECTOR (MECHANICAL).
Remove and clean smears by using a soft cloth dipped in water or diluted chemical
1
detergent and then squeezed dry.
Remove the CRADLE.. When removing the
2
retaining ring (E ring) be very careful so as
not to bend the rotary shaft.
Remove stain from the rotary shaft and shaft
3
receiving portions by wiping off with a soft
cloth. etc.
After wiping off as per previous step, further apply a dry cloth to completely dry the
4
Coin Selector.
Coin Insertion Test
Once every month, when performing the Coin SW Test, simultaneously check the
following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the cashbox correctly?
Is the coin rejected when inserted while keeping the REJECT Button pressed down?
Insert a coin while keeping
the REJECT Button pressed
down and check if it is
rejected.
CRADLE