Table of Contents
Advertisement
04
67
FIG. 4 TOOL POSITION FOR MAINTENANCE OPERATIONS
POSITION DE L'OUTIL POUR L'ENTRETIEN
WERKZEUG WARTUNGSPOSITION
COLOCACION PARA LAS OPERACIONES DE MANTENIMIENTO
POSIZIONAMENTO PER LE OPERAZIONI DI MANUTENZIONE
01
03
75
59
29
HYDRAULIC CUTTING TOOL
HT-TC0851
1. GENERAL CHARACTERISTICS
– Application range: is suitable for cutting copper, aluminium or telephone cables having
a max. diameter of ...................................................................... 85 mm (3 - 3/8 in.)
– Rated operating pressure: ........................................................ 700 bar (10,000 psi)
– Dimensions: length ..................................................................... 652,5 mm (25.7 in.)
width ...................................................................... 175 mm (5.6 in.)
– Weight: ........................................................................................ 6,6 kg (14.5 lbs)
– Oil: ........................................................ AGIP ARNICA 32
– Operating positions. The three operating positions are identifi ed on the main handle,
(04), which rotates relative to the reference symbol
Rest position (Handles locked): lock handles together when
tool is not in use.
Release position: close the moveable handle (59) against
the main handle (04), in order to discharge the oil pressure
and retract the lower blade.
Operating position: operate the moveable handle (59), to
build up pressure and close the lower blade.
– Advancing speed. The tool auomatically switches from a fast advancing speed of
blades to a slower cutting speed.
– Safety. The tool is provided with max pressure valve; MPC1 special manometer, is
available upon request to check the proper setting of the valve.
2. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem
and give you the necessary instructions on how to dispatch the tool to our nearest service
Centre; if possible, attach a copy of the Test Certifi cate supplied by Cembre together
with the tool or, if no other references are available, indicate the approximate purchase
date and the tool serial number.
2
ENGLISH
or
or equivalent
SHELL TELLUS OIL TX 32
(see Fig. 1).
Advertisement
Table of Contents
